|180 - 205 Degree Celsius
|163 Degree Celsius
|vicat softening temp
|60,2 Degree Celsius
|MFR 220 Degree Celsius
|Impact strength Charpy method 23 Degree Celsius
|Notched 1,7 KJ/m2
PVA-M filament is our preferred, cold water soluble, supporting material for dual extruder 3D printing. The modification on the raw material results in a filament that is much more thermally stable than a regular PVA. It also bonds well to PLA, ABS and PET-G, which enlarges the application field significantly. This polyvinyl alcohol-based filament is non toxic and biodegradable once dissolved in water. Easy printing, much less failures and easy removability makes this the supporting material you should try.
Recommended temperature for heated bed is +- 35-60 Degree Celsius. Do not exceed a printing temperature of 225 Degree Celsius, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. The speed at which the product dissolves in water is dependent on the volume of the printed object and the temperature of the water. PVA dissolves in cold water. Higher water temperature (up to 70 Degree Celsius is no problem) will accelerate the dissolution. PVA can be used on all common desktop FDM or FFF technology 3D printers.
Cool and dry (15-25 Degree Celsius) and away from UV light. This enhances the shelf life significantly.
|Type of units
|Manufacturer Part Number
|Original Product Name
|PVA-M 2,85mm natural 0,5kg - 3D Filament Supplies
|Core Product Name
|PVA-M 2,85mm natural 0,5kg
|3D Filament Supplies
|Country of Manufacture
PVA-M 2,85mm natural 0,5kg - 3D Filament Supplies is toegevoegd aan uw winkelwagen
PVA-M 2,85mm natural 0,5kg - 3D Filament Supplies is verwijderd uit uw winkelwagen