BQ, Copper Filament PLA 1,75 mm 750 gr

Description BQ, Copper Filament PLA 1,75 mm 750 gr

Dimensions
Size	Tolerance
1,75mm	0.05mm

Thermal properties
Description	Test method	Typical value
Recommended printing temperature	-	195 - 220 Degree Celcius
Recommended printing speed	-	40 - 100 MM/s
Recommended heated bed (if you have one, not strictly necessary)	-	50 - 60 Degree Celcius

Physical properties
Description	Test method	Typical value
Tensile strength (max.)	ISO 527	25 Mpa
Elongation at break	ISO 527	3 - 10%
Flexural strength	ISO 178	40 MPa
Flexural modulus	ISO 178	7,0 Gpa

3d printing with metal on your own desktop 3d printer! This amazing one of a kind filament will allow you to print with actual copper at home.

Colour: Copper

3d printing with metal on your own desktop 3d printer! This amazing one of a kind filament will allow you to print with actual copper at home! Straight from the printer parts look almost laser sintered with a matte finish. With a bit of sanding and polishing the copper particles will start to shine and shimmer unlike any 3d printing filament you have seen before. The weight of the material is something special, about 3 times heavier then our regular PLA/PHA. *Testing showed reliable results using the all metal hot-ends, such as the E3D and the Makerbot Replicator 2 hotend. Hotends which use a teflon isolator coupler can generate adhesion to the copper filament possibly leading to clogs and is there for not recommended for novice users yet.

Testing showed reliable results using the all metal hot-ends, such as the E3D and the Makerbot Replicator 2 hotend. Hotends which use a teflon isolator coupler can generate adhesion to the copper filament possibly leading to clogs and is there for not recommended for novice users yet.

Storage

Cool and dry (15-25 Degree Celsius) and away from UV light. This enhances the shelf life significantly.